Aimpoint H30L collimator

Collimator sight of closed type from the Aimpoint Hunter H30L. The elongated body (index L) for installation in larger gauges, which require larger distances between the front and rear base of the landing fasteners. Designed specifically for hunting use. At a distance of 100 m red dot rifle scope covers on the target area 6 cm!

Can be installed on a weapon as a standard sight with 30 mm body, the application of standard fasteners (brackets) from the MAC, APEL and other manufacturers. Able to work in the most challenging conditions, and to withstand the recoil of the most powerful calibers. A favorite among big game hunters worldwide.

Aimpoint H30L прицел коллиматорный
The differences from line 9000 and Comp:

  • Maximum lens with a 35mm (!) absolutely impossible to “tunnel” effect when aiming.
  • Maximum possible collimator light transmission at dusk, by applying special antireflective coating on the lens and its extra diameter
  • 50`000 (!) hours of continuous operation from a standard and widely used CR2032 3V battery
  • Digital control of brightness of a luminous point dimension 2 MOA with increased up to 12 levels range.
  • Completely mist-free and filled with an inert gas under pressure.
  • 100% waterproof.
  • Unrestricted field of view with excellent light transmission.
  • THE COMPLETE LACK OF PARALLAX!
  • All that is necessary for entering amendments on the scope — protective cap handwheel input of amendments serves as both a key to enter them on the movement.
  • Central tube diameter of 30 mm.

Features:

  • Extremely large field of view
  • The complete lack of parallax effect!
  • Unaffected by outdoor weather conditions
  • 100% reliable design
  • The complete absence of dangerous and harmful materials
  • Complete safety for the shooter’s eye (No laser emission)
  • Mechanical switch intensivnosti highlighting marks for convenience and reliability
  • Very high accuracy perelivania
  • Grid 2 MOA = 60 mm at 100 m
  • Type of sight indoor
  • Holographic sight no
  • Mount sight ring 30mm
  • The power is CR2032
  • Lens diameter / lens size in mm 35
  • A magnification of 1x
  • Reticle dot
  • Change the brightness manual
  • Change the aiming mark no
  • Compatible with night vision no
  • Range of input of amendments +/- 2 meters at 100 meters
  • The diameter of the Central tube, mm 30
  • Weight, g 235
  • Moisture proof up to 5 meters!
  • Operating temperature range -30°C…+60°C

Leave a Reply

Your email address will not be published. Required fields are marked *