29.03.2024

Feeding trough on bream

Fishermen are engaged in catching bream in different reservoirs; you can count on especially large specimens on the river. To attract the attention of large individuals use a donk with a feeder for bream.

But before using the tackle it is necessary to find out where it is better to place the tackle so as not to waste time.

It is in such places, according to experienced fishermen, that the bream stands mostly in flocks. Depending on the time of year, a small migration of individuals is possible, and in hot weather, mounting on a bream during the feed stream is used more at night.

For catching bream on a ring or by other methods with a feeding trough, it is necessary to prepare high-quality lure, which would be close in color to the bottom of the bottom. To do this, a small amount of clay or sand is often added to the finished mixture from the reservoir and mixed thoroughly.

Purpose and principle of operation of the feeder

The use of a feeder for fishing has been used for a long time; this subject of fishing has hardly changed its appearance over the entire period of its existence. Some improvements have been made, the principle of operation remains the same. Feeding trough for spinning with bait should be selected according to certain parameters, its main task is to deliver the feed to a specific place on the pond. After all, good places to catch trophies are not always located near the shore.

Formation of tackle provides for fastening of leads with hooks, on which the catch will be cut.

The principle of operation of feeders is simple:

  • the product is qualitatively fixed to the main line;
  • stuffed with a sufficient amount of porridge;
  • after falling into the water, the contents of the feeder at the bottom will be gradually washed out, attracting the smell and taste of the inhabitants of the reservoir;
  • the fish begins to feed, swallows baited hooks and a notch occurs.

It remains only to remove the catch and remove from the hook.

Feeders for catching bream are used different, the choice is influenced by many factors and personal preferences of the angler. An experienced comrade will help you to understand a wide variety, who should ask a novice for advice.

Varieties of feeders

When forming tackle on bream with a feeding trough from the shore or from a boat to a beginner, it’s easy to get confused, each specialized store can offer a sufficient number of various feeders. The choice to make is not easy, you need to know some secrets.

So that the porridge for fishing for bream was delivered to the exact place you need to learn how to choose the feeders correctly. Among the many varieties of consider the most common types and places where they successfully applied.

Spiral

Use such a feeder for catching bream in a closed pond where the movement of water is minimal. This species is more suitable for catching lake fish of crucians and medium-sized carps. But some fishermen like this particular option, especially since they make the product on the bream with their own hands during a meek time.

To make a spiral feeder alone enough to have a piece of strong wire, pliers and a little ingenuity.

A product of this type provides for the formation of a blind type tooling, in order to make a sliding type in the middle of the turns, it is necessary to mark the hollow tube of small diameter.

Donka on bream with a spiral feeder is not suitable for the current, it will simply be demolished from the place of casting. Frequent re-casting of gear may scare the fish, as a result, you can remain completely without a catch.

Framework

This type of feeders is more common, the most famous option is the “method”. In fact, the frame version is an improved version of the spiral, the main difference is the location of the plastic plates along the axis. Fishing on the feeder method is carried out to a greater extent in closed reservoirs or in parts of a river with a small current.

The bream is caught on the method feeders, as well as catching carp and carp will be successful.

Frame feeders are different, snap with them can be both deaf and sliding.

Latticed

This is an excellent type of feeder for the current, the weight of the sealed load is sufficient, so the product itself is perfectly at the bottom even with a strong current. The lattice version is considered a classic for tackle on bream on the course, they have been used for many years. On the Volga, a hake bream is always equipped with a lattice option.

There are many types of trellised feeders, mainly they are distinguished depending on the shape.

There are such types:

  • triangular;
  • rectangular;
  • square;
  • cylindrical;
  • bullet.

An important parameter when choosing a feeder of this type is the material from which the product was made. Metal woven mesh is not the best option, but the sheet metal with slots ideal for bream for fishing on the river, even large individuals.

There are masters. Which independently make similar products. The basis is taken female hair curlers, then each uses its own tactics. In most cases, the product is simply tied for existing ears.

Lattice feeders are independently used for blind mounting, the use of additional materials, such as counter-knobs, allows you to make the installation slip and attach several leads.

Open and closed

All of the above feeders are divided into closed and open, they are used depending on the location of the fishing.

The closed type is intended for fishing in reservoirs with a strong current, where the washing-out of lures occurs quickly. The closed product will not allow water to quickly take away the porridge when casting, the feed will be leached out gradually, enticing the bream to try the bait closer.

An open type is used in stagnant water, this includes spiral and lattice species. The bait of them will be washed out gradually only in closed reservoirs, the river will take away the porridge very quickly.

Zakormochnye feeders in most cases are closed, but the distance between the ribs is sufficient so that the porridge was freely washed out, even in standing water. The bottom of such products is missing.

For catching on the ring use a little other products. The installation provides for a metal ring and a grid with a small point as a feeder.

Baits for feeders

An important component of fishing for a feeder from a boat or from the shore is bait, without it there is no point in building such tackle. in the feeder is different, there are such varieties:

  • commercial mixes with dry or wet form;
  • self-cooked look.

If the fishing turned out to be spontaneous, it is easier to go to the store and purchase the kind of food that has already been prepacked. Experienced fishermen recommend doing it yourself. At home, steaming is not long, but the effectiveness will be much better than the purchase.

Requirements for prikormke

Lure for the ring for fishing bream its performance is no different from porridge for other types of feeders.

The main requirements for bait are:

  • in the final form, the color of complementary foods should not contrast with the ground at the bottom of the reservoir;
  • zakormochnaya porridge more raspypastaya, it will help her to quickly fall out of the feeder;
  • bait in the feeder for fishing more viscous;
  • bait ingredients must be included in the feed;
  • food must have a smell.

Ingredients and flavors may vary depending on the season and weather conditions.

In cold water in early spring and with the onset of autumn cold, primorye for bream at home is done with the addition of animal particles. The summer heat will change the preferences of fish, at this time of the year vegetable bait will work better.

Recipes bait

Most baits are universal, they are used not only for rings for bream. Such options, cooked with their own hands, carp and crucian will also appreciate.

For catching bream on the ring, there is a recipe for complementary foods for everyone, you can change some ingredients, replace some components.

Porridge for bream with your own hands for a quick not to prepare, but there are options that do not require much time:

  1. Kilo cookies turn into fine chips, add 100 g of breadcrumbs, twice the meal of sunflower seeds, 100 g of flour from rolled oats. Everything is well mixed together, if desired, you can add anise oil.
  2. The feeder for catching peaceful fish on a river or on a lake is packed with such a composition: a kilo of cooked millet porridge is mixed with a large can of canned corn. In cold weather, add to the mixture of cut maggots, worm, bloodworm.
  3. A simple recipe for ringing is a mixture of the same amount of crushed biscuits and sunflower cake. For bundles add a glass of semolina. A pound of compound feed or any boiled cereal will be an excellent base for kneading.

The well-known Salapinskaya porridge will be an excellent option for bream for fishing in the current. Every self-respecting fisherman knows her recipe.

Features of the installation of feeders

Tackle on bream with the use of feeders is different, the conditions for fishing and the methods used are important.

Feeder gear

the feeder will always be catchy if assembled correctly. As a rule, such an installation is usually deaf; Most often, the feeder for bream is collected by such methods:

  • a helicopter and two nodes;
  • symmetric loop;
  • asymmetric loop;
  • paternoster

Each of the species is desirable to look for yourself to understand all the details of the procedure.

Which leash is better to put when collecting gear? The main indicator will be the main fishing line, pedestrian choose an order of magnitude thinner. This will help you to lose only the hook when hooking the gear, the rest of the assembly can be saved.

Bottom gear

How to make a donku with a feeder is not known to everyone. Before you properly collect the gear you need to decide on where the fishing will be done. Tackling from a boat is going almost the same way as for fishing from the shore, only the rod used will differ.

From boats, they often catch bream on the ring, the hand-picked tackle will be more reliable than the purchased analog. From the shoreline, more often they make a sliding installation, so it will be easier to spot a careful bream.

Technique catching with feeder

For fishing on a ring or with another variant of the feeder, it is important to observe the technique of fishing.

The main points are:

  • lure throw in one place;
  • rod when casting should be vertically relative to the reservoir;
  • as soon as the feeder goes into the water, the form is sent to the stand, while not forgetting to loosen the friction clutch.

Having done everything, it remains to wait for the bite, for this purpose they use bells, a float for sagging, and at night the whip is equipped with a firefly.

Catching is a little different from where the area is harvested.

From the shore

For catching bream from the coastline, feeder rods and pickers are used, even a float rod with a feeder will do. All steps are carried out exactly with the description above, only the tension of the line is made so that at the slightest movement of the feeder you can see the bite.

During

Feeder for catching on the current is taken heavier, at least 80-100 g, casting happens the same way, only the bite is looked at by the float on sagging or directly on the tip. Casting is made identically, only the leaching of feed should be checked more often.

From the boat

It is better to offer feed for bream from a boat using the method for a ring for fishing, so it is much easier to catch a bream. To do this, make their own hands tackle, which is carefully lowered next to the boat and waiting for poklevok.

it will help in catching bream in closed reservoirs, more purchasing options are used on the river, but some craftsmen manage to produce such a snap at home.

Leave a Reply

Your email address will not be published. Required fields are marked *