Wide detection range
The high resolution microbolometer (384×288) provides a good detail of the observed objects and a large detection range
Optical zoom thermal imager is 2.1 X. the device has an additional option in the form of twice digital zoom.
Modes of observation
The Quantum S possible to choose the mode of observation, providing optimal results for specific conditions. The program of the thermal imager provides three modes – “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved detail warm objects).
High refresh rate
The refresh rate is 30 Hz, which ensures a smooth and consistent image when observing dynamic object
Possibility of use in frosty conditions
The Quantum effective when operating in low temperature conditions (-20°C) due to the application in the design of frost-resistant OLED display (the image remains the same as when observed in conditions of positive temperature of the surrounding atmosphere)
Quantum S gives you the opportunity to choose one of three modes of calibration of microbolometer — silent manual (“M”), automatic (“A”) and semiautomatic (“H”). Mode “A” implies that the calibration algorithm is performed fully automatically and without user intervention (the start of the process (the time of lowering of the blind calibration mechanism) is defined programmatically). In the “N” the observer, based on the image quality, decide on the necessity of the calibration matrix, starting it by pressing “Cal”. Manual calibration (“M”) by pressing the button when the lens cap is closed. The “M” mode it is recommended to use while hunting due to silent operation.
Short start-up time
The Quantum features quick start – up time 5-7 seconds from the moment you press the power button to full operational status monitoring. This is one of the best indicators in the class
All Quantum models are equipped with an analog video output for connecting external recording equipment or transmitting image to the display.
Significantly increase the time of operation allows the use of external power sources to which the Quantum is connected with a specially designed connector. In winter conditions the power supply can be placed under clothing.
Adjust the brightness and contrast
The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation
The Quantum is provided by 4 batteries (battery) AA. The batteries are stored in a special container which is then placed in the battery compartment of the device.
Body of carbon fiber is really solid. A secure hold of the instrument provides a partial brasilianum corps.
The type of microbolometer: UL 03 16 2
Microbolometer resolution: 384×288
Frame rate, Hz: 30
Spectral sensitivity range, microns: 7,7 13,2 …
Display type: MDP01A Maryland OLED Microdisplay
Magnification, x 1.1
Digital zoom x 2
Lens F19/0.7 And
The field of view, °, horizontal/vertical 26.8 x 20.8
Limit refocus the eyepiece, diopter ± 5
Range of detection
Range of detection, m (object of type a life-size figure of 1.7*0.5 m) 500
Supply voltage B 4 ÷ 6
The type of battery 4xAA
Battery life, hour 5.5 in
External power supply DC 8.4 ÷ 15
Physical and operational characteristics
Protection class (according to IEC 60529) IPX4
Operating temperature range,°C -20 … +50
Dimensions, mm 200x86x59
Weight (without e-ing power), kg 0,35
The thermal imager Quantum HD19S
Spare battery container
Napkin for cleaning of optics