The choice of the holder for spinning for PVC boats

Holder for spinning for PVC boats, and other types of watercraft is an essential equipment for a huge number of anglers. It is used not only fans of trolling. It can be useful to anglers, poplavochnikov and gonochniy.

This convenient device allows you to rest the hands and breath in the process of fishing.

Today holders for spinning are available in the assortment of many companies that manufacture accessories for boats. Each manufacturer produces products that differ structurally and functionally.

The choice of specific models of attachment of the rod depends on:

• design crafts,
• used gear
• the personal preferences of the angler.

When you need the holder?

During fishing, sometimes it is necessary to put the rod aside. It can be banal fatigue or any action directly related to the process of catching, for example, placing the fish in a cage or tying a snap. Just put the bait on the bottom of the boat is possible, but it can cause some problems:

1. Tackle will occupy the free space in the boat, limiting the movements of the angler.
2. High probability of accidental breakage of the rod. It is possible to attack, to strike with a paddle or other rod, and other problems.

When trolling, even in the face of a lake or river, to keep in hand spinning hard enough. The angler must give yourself rest in order not to lose concentration and get the maximum pleasure from the process of fishing.

Danocrine and fidelity fishing from boats, you know the value of a good holder for rods. First, the gear does not take up any extra space inside the craft. Secondly, they are securely fixed. Thirdly, you do not want to hold their hands. That saves time, effort, and allows you to react faster in emergency situations and not miss bites.

In General, the rod holder is compact, a simple device invented to simplify the process of fishing and allows anglers to enjoy being on the water, enjoying every moment of their stay in the fresh air.

Classification of the holders

Fixing for rods in the boats can be classified according to various indicators:

• according to the method of Assembly and installation;
• in the mounting structure of the spinning reel;
• the number of placed rods;
• production material elements of the holder;
• by means of fixing the ship.

By means of the installation of all the boat holders are divided into two large groups:

• separate;
• combined.

Separate holders “stick” mount to the vessel and the rack rods are connected when installed in the boat. During transport, they are compact, but the process of their Assembly is time-consuming. Combined have a one-piece design with an adapter for fixing the watercraft. The faster they are in working condition, but overall in the carriage.

Design holders can be divided into two groups:

• hold two points;
• glass type.

The first is mostly used in gonochnoj and float fishing. It allows you to change the angle of the blank of the rod, exposing optimal. The second demand of tralingstop and fans spinning. In most cases handles glass type are installed vertically. There are models that allow change its position.

The number of rods which can be placed on the mount holders are divided into:

• single;
• double;
• mnogoplanovo or Yellowstone national Park.

The latter are used in sea or ocean trolling. They represent the longitudinal, horizontal frame, on which are placed cups for rods. Their number can vary from five to twenty. This comfortable and functional design is used in large boats or RIBA.

Holders for rods can be made of different materials. This affects their reliability and final cost.

The most common are the product of:

• plastic;
• metal;
• a combination of materials.

The holders are made of plastic materials, lighter but less reliable and not as durable as it is made of metal. The latter, in turn, have more weight. Combined fastening consist of components and parts made of different plastics and alloys that allows you to obtain the most successful combination of functional qualities and cost.

The best examples

Of course, the use of holders for fishing not only makes fishing comfortable but also saves the fan from a lot of inconvenience and possible hassle.

The market is filled with products of different designs, look at some of them, in our opinion, the most successful:

1. Holders Scotty. It is a well-known canadian firm, specializing in the production of goods for fishing. The range of holders is rather extensive, the main differences are the means of fixing devices on Board. You can install them on the transom or seat, and also to Board the boat or on guard rails. The main advantage of the model is the possibility of installation at any tilt, because it has a degree of freedom in 360 degrees. Most models of Scotty’s compatible with any mounting adapters.
   Photo 1. Holder Scotty.
2. Quite a long time holders can be produced of the brand of a Hummingbird, is very popular in Russia. They are intended for installation on boats made of PVC. They are equipped with three main components: self-retaining fixture plywood, treated for water-resistance bakelite with a slit for the rod to the fasteners that are glued to the cylinders.
3. A model for retention of spinning rods brand Avacha also designed for targeted use on boats. You can identify in this construction a number of advantages, which are as follows:
   • – they are compact and do not interfere in the boat as mounted directly on the Board;
   • – the elongated glass, which reliably insures the rod from relegation;
   • – the presence of plastic inserts protects the handle of the fishing rod from damage;
   • – attractive design of Nickel glasses, looking presentable aluminum or stainless steel.
4. Amfibalt – glass holders attached to the trolling arc clamps. The holder is made of stainless steel thickness of 1.5 mm, which defines its high strength.
5. Noteworthy holder Daichiseico, there is a whole family of devices for different types of boats Uketaro.
6. Patriot. The product is made of plastic. The mount is glued to the Board, and the device is mounted using the adapter.
    Photo 2. Holder Is A Patriot.

Numerous other types of fastening virtually repeat the above-described samples in varying combinations.

Recommendations when buying

Choosing a spinning holder for boats of PVC, note the following features:

1. It should not interfere with the movement on the water and be easily removable.
2. When you minimize the boat the device is dismantled, and the sticker under it should not interfere with the folding.
3. Fixation of a spinning must be reliable, especially when trolling and feeder fishing from the boat. Large copy of the trophy can easily pull off the rod. In this respect, the most reliable glass devices.
4. The shape and construction of the holder must not damage the inflatable hull.

Many models of the holders are installed with the use of stickers. For inflatable boats without risk because the PVC material is very durable. But the glue you need to use only the recommended instructions. The convenience of this setup is that holder is on Board or on the Bank, leaving enough room for any manipulations.

The means of fixing holders to the boat

To fix the holder in the boat in several ways. The choice is determined by the specific design and type of craft.

There are the following installation options:

• bolts;
• with screws or screws;
• with glue;
• clamps.

Help! There are a holder of a spinning flush to the transom. However, such designs are used rarely, they interfere with the engine mount.

The holders of the bolts can be installed in a metal, wooden or plastic vessels. You need to make holes in the specified locations, and then lock there mount, using an additional set of washers and nuts. In inflatable boats to use this option will not work.

The screws allow you to position the holder under the “bars” in wooden and plastic vessels or in the sides and transoms of inflatable PVC boats.

This mount is simple to install, but it has several disadvantages:

• Screws damage the elements of the boat, leaving holes and splits.
• In the process of moving over the pond from prolonged exposure to vibration mount can become loose, which will lead to the failure of the holder or even the loss of a tackle.

The adhesive mounts are planted mainly in the PVC or made of rubber boats. Sometimes this mount is used on the sides of plastic vessels. This is a good option, but it requires the selection of a reliable adhesive and careful observance of technology of its application.

Of the clamp allows to keep intact the elements of craft, unlike the holder of a spinning inset. However, when mounting on the bench of the vessel from PVC this version of the installation takes place and restrict movement to the angler. When fixing to the transom of this design would interfere with the engine management.

As you can see, installation methods spinning holders are many. Each has its advantages and disadvantages. Choosing a specific embodiment of fastening, you should consider all the factors, not to lose gear in the process of fishing and not to spoil the boat.

Holder with your own hands

Fastening for fishing-rods are produced not only by specialized companies. Some variants of execution can be implemented at home with available materials and parts, as well as fantasy and desire.

Holder for spinning your own hands is cheaper than store bought. The angler can produce the mount of required size and configuration, to contribute their own ideas and achievements. In General, experienced lovers of fishing out a good product, no worse than factory.

Improvised holder on the clamp

This is a simple but reliable mounting structure for spinning, which can make any angler. For it will need:

• plastic sewage pipe with a diameter of 50 mm;
• clamp;
• pipe clamp for plumbing connections;
• a metal plate or tube;
• plug for pipe of the desired diameter;
• set of bolts, washers and nuts.

Step-by-step instructions for making a holder under the spinning on the clamp as follows:

• 1. In the clamp performed by a pair of holes required for mounting.

Tip! Instead of clamps you can take a used grinder. It is necessary to cut the upper part and leave the mount.

• 1. Similarly, in the plate drill two holes for connection with the clamp, the third do the top of the strut.
  2. Further, with the bolts connecting the clamp with the upright.
  3. In a free upper hole to fix the clamp.
  4. The clamp pinched a section of pipe of plastic material, which already has a stub.

All. A simple holder for spinning boats of PVC ready for use. This mount can be easily fixed on the seat or put on the transom. It has the minimum cost and convenient to use.

Targa their hands

Make mnogovintovoy holder spinning rods trolling fishery is more complicated. You need to have the skills of carrying out of welding works or have to see a specialist. Materials will need to cut thin-walled metal pipe, which will form the basis of our homemade four course dinner. In addition, you should take the electrodes, paint, sandpaper.

The algorithm for making a round rail with their hands as follows:

1. Take a section of pipe of the required length and vygeboom his arc for the size of the vessel.
2. The ends of the bent tube replusive hammer and drill them in the two holes required for attachment to the sides of the boat.
3. The glasses under running rods from strips of the same tube. One end brew metal plugs.
4. It now remains to be arc welded to the desired number of cups through a certain distance.
5. We clean the resulting tarsu and cover it with waterproof paint.

Ready tarsu can be fastened to the sides of the vessel with a set of nuts, bolts and washers.