12.10.2024

Pike fishing in thick tanks

With energetic pike fishing — — when the fishermen is regularly searching for her, moving from place to position — — the most fascinating will be the areas of the tidewater disordered with lawn.

The method below is easy: we are looking for areas where the water over the turf is at the very least 10 centimeters, we make a brief throw with a properly picked bait — as well as we quickly make — it in the upper perspective. The electrical wiring itself can be executed evenly, or with a small « podgrovka » (state — «jerking).» There — are likewise appealing areas where there are little glades in the turf rug. Generally, such water places have a diameter of from 2 to 10 m.

Detect them, using polarized glasses, no worry. As well as in order to capture them correctly, it is essential to stick to the following methods: meticulously bypass the clearing up, coming close to from the leeward side to its edge regarding 5 meters(it is not recommended to go inside, as this may scare the killer standing here, and also it will certainly not be possible to finish — due to the fact that the deepness in these places is not greater than 1.5 m).

It is needed to make a short throw in such a manner in which the bait splashes down past the contrary boundary of the yard. Similarly to capture the glade in the facility and along the edges. Extremely guaranteeing in this field is the publishing with a routine direct exposure of a small pause, giving the lure to prepare safely in the water column. We have to not fail to remember that the angling line need to always be in stress, since bite can follow at any 2nd.

If after 5-6 posts the predator really did not dawn, after that you can search for a brand-new place with a peace of mind. With passive fishing, it all boils down to discovering one promising place, which is then completely hunted by fan casts of numerous types of attractions. It is just needed to identify the possible area of car park or exit of the pike — generally, it is located in fairly deep(on the tidewater scale) areas with adjustments in the lower topography or on the border of grass and also clear water. There are usually observed two peaks of killer activity: the first one materializes itself almost from the preliminary casts — if the chosen area is currently chosen by the pike for car park or searching; The 2nd is associated with momentary stages of activation( — hunting )of a pike.

Predicting the time of event of one and, additionally, the various other is difficult, and, relying on different variables (for example, on wind rate as well as instructions, other climate condition), they might be different at the same time, yet in various parts reservoir. The strategy of capturing deep areas of the estuary is around the following: we make several fan casts, doing the circuitry so that the lure passes over the bottom plants. In order to appropriately navigate the speed and sort of wiring, it suffices, generally, to perform 2-3 casting with the picked bait. To be limited to one kind of wiring or using one bait is ineffective, their variety increases the opportunities of success.

As for the technique of gathering the borders of distilled water and also lawn, it is basic as well as minimizes to casting along the border line. From the boat, this line is « checked out » conveniently — it can be seen from the diversity of water. From individual observations, I can note the truth that the greatest buildup of fish in the tidewater is always on the side where the wind impacts. However when» the last becomes considerable or perhaps pre-storm, after that the pike for the the majority of component currently offers choice to the coastline from which the wind blows.

Although it would certainly be more rational for her to be located precisely on the opposite coast, considering that there the wind current is defeated by a fry and other « bel ». It is easy to describe such a phenomenon: there is an enough amount of fish of any rate of interest for pike near the windward coast, yet below with really strong wind the water often remains clean. And also it comes to be a definitive aspect for pike «. For an angler, this is just a plus, which you just require to utilize, since socializing on a watercraft in the damaging wave of the leeward coast is a pleasure! Generally, with boosting wind pike in the estuary is constantly turned on, as well as currently attacking huge specimens is more than likely.

When angling for wobblers, unequal circuitry confirmed to be the best, which not just provokes the predator to assault, however additionally minimizes the chance of tees hooking on the underwater yard. It means a drifting appeal and also a tiny pause throughout wiring. Still encouraging coastal reed line. Many attempted to capture there, but after 10-15 casts along the reed, not seeing a solitary bite, this was quit. And in vain. Electrical wiring the bait along the reed does not constantly offer the desired outcome, but the wiring via(! ) The reed is still as efficient.

The truth is that in the tidewaters, generally, there are 2 wall surfaces of reed. The very first one is rather slim, there are always small spills behind it (the aborigines call them”attractions”), as well as currently behind the lures the 2nd, dense wall of the coastal reed begins. So, it remains in such zamanuha and holds a multitude of pike, as well as rather huge! So the fishermen is called for to compel himself to catch where there would certainly be no fish.

Think me, she is not just there, however she additionally consumes quite well! In zamanuhah most effective performance can be achieved or irregular, with constant jerks, circuitry a rather big, from 7 to 15 cm, a wobbler with a deepness of 1 m, or similar in dimension tornado with balanced out hook. Frequently, huge pike stands far away in the reed, and also it is not possible to entice it out with regular baits. You can use either a « non-stitching » with a tough solitary crocheted hook, or spinnerbate. Both must have a mass of a minimum of 20 g. In this case, the bait can be frankly and forcefully cast directly into the reed, and also this mass is fairly enough for the lure to easily “drop”and not hang «on the reed. Electrical wiring ought to be done most gradually — to make sure that the lure, having touched the reed, does not catch on it. Run it is rather easy.

And also after attacking, get ready to be pretty worried since the currently effective southern pike, and also in reeds as well as at superficial depths, can create such pearls that occasionally you also need to eliminate a watercraft from a poke to at the very least somehow stand up to the pike resistance. Spinning is recommended to utilize quite difficult and effective, although I myself am a fan of light spinning. The test variety — from 5 to 21 g, maximum — from 7 to 28 g, is no longer needed. Size — from 2.4 to 2.7 m — in my opinion, the most ideal, with such fishing. The selection for a hard spinning is due to the demand for the pike to be pulled out via the yard. The restriction on the examination schedules — to using light — cruising baits, the casting of which is usually executed downwind. The — line is better to use wicker.

My preference is most definitely “Japanese.”The breaking lots of the cord must remain in the variety of 4.5 to 7.5 kg, which guarantees a confident feeding of fish even with thickets, assists in easier release of the bait caught on the lawn(the southerly grass, incidentally, is extremely hard)as well as offers the additional bait to a very easy bait, adding to the relief of her spreading into the wind. It is best to make a chain from a versatile chain product and connect it(solder with phosphoric acid) directly to the appeal of the bait. At the contrary end, you ought to mount a tiny but sturdy swivel, to which the cable is attached. I recommend not to make use of the carbine(clasp), it will certainly help you to some extent eliminate the trouble to cleanse the « preconception » of the wobbler from a lot of hanging lawn and also mud.

We have a wobbler therefore two tees — still torture! Jumping on a regular cargo anchor is hard, because the bottom in the estuaries is sloppy, the anchor is snugly drawn right into the mud, and it will certainly be almost difficult» to pull it out. As well as a couple of added pounds of dirt as well as yard scraps, raised with an anchor, are unlikely to please you in a boat.

For regional fishermen, the anchor in the tidewater is the supposed « spear », i.e. lengthy(up to 2 m, often — and more )post with a rope that is tied to the watercraft. Extremely comfortably. Lures are various variations of light-weight rotating or oscillating appeals, home-made or converted, in mix with various variations of loaded jig snap-ins as well as supplemented with shallow-deepening or surface wobblers. On this topic, we stay a bit more.

Rotating lures — from the most appealing attractions for tidewaters. To day, there are rather a lot of models of different”lightning wheels” of the lightened kind, which can be effectively made use of for pike fishing. I personally don’t have any type of particular choices for this or that bait, although I found a few of them to be the most fascinating. Namely: Mepps Lusox № № 2-3(utilized without front packing — photo 1), DAM Libelle № № 2-3 (image 2)and Nimpfa № № 1-3 from the Polish company Dragon (a lot more exactly — HRT-photo 3). Bad spinners with plastic( polypropylene) core, for instance — Muskie Tail(image 4)and Rooster Tail Lite from Warden’s(USA)as well as Ondex № № 3-5 from the French Rublex(image 5), have actually — shown themselves.

On all « turntables » (other than Lusox), I constantly change the regular tees to Owner or Gomakatsu. You can apply various options for both totally home-made appeals, and converted « factory ». Modification is a matter of replacing a steel core with a plastic one or removing the core altogether (photo 6).

Sometimes I gear up converted « turntables » with either a tee with an edge connected to it(photo 7), or a countered hook with a whirlwind (photo 8). Both the edge(huge sufficient)and the tornado «work as»a stopping effect, slowing down the speed of the lure falling in the water column, as well as offer the lure added windiness, which has a positive result when casting in the wind. Oscillating rewriters for catching « toothed » are likewise used of the lightened type — either with a hard-crocheted hook( a « non-hooked » one with a pushed tendril) or with an offset hook with a twister.

What function is played by the offset whirlwind, I have actually already told on the example of rotating spinners, I can just add that the tornado also supports the spinner with intensive posting. From particular recommendations on the models, I can point out the well-proven « non-clinging »( picture 9) firms Nemire(USA) and also Rasanen 70/10 from the Finnish Kuusamo. Of the traditional lightweight spinners in my arsenal, the rewriters were Williams (Canada — photo 10, 11 )as well as Falk Fish(Sweden) of the BIG Catch model number 2-3, all furnished with a twister.

I utilize wobblers in dimension from 5 to 9 cm, with a depth of 0.5 m. Posting — different variants irregular, because I consider it to be one of the most reliable in any problems, specifically considering that, with a pause in the circuitry, it is feasible to hold a floating wobbler plainly above the grass. For the « unique benefits » I can note the wobblers Duel — Hardcore No. 0(picture 12), Daiwa— Minnow Dartist as well as Maria — Princess GX. When it comes to the volume baits of the « popper » course, there is a really interesting angling strategy, thanks to which appealing locations can be fished either with extremely little deepness over the yard, or if there is a lot of torn turf in the water, which does not allow for various other kinds of baits.

The definition of this method is as — follows: we get rid of all the hooks from — the popper as well as, having actually examined its operability at the boat(in instance of breakdowns, we clamp instead of the removed tees on the loopholes of the wobbler pellets evaluating about 0.5 g), we make an actors — and carry out the normal popper electrical wiring. And if a pike strike adheres to, which is simple to identify, considering that as a result of the superficial deepness, the « toothed » generally misses out on, leaving the breaker, after that we swiftly wear down the popper — and with the 2nd rotating we send a tee-equipped lure to the pike’s leave factor. Usually, bite follows with the first turn of the coil take care of.

The — popper itself in the « fight equipment » is no much less fascinating and productive bait, but with an average and also even a lot more so with a solid wind, its usage is simply difficult. Non-standard lures(in the sense of — traditional spinning )are of the very same kind of double whirlwind offset hook, various fly catches and also pike streamers, used with no additional loadings. All this can be extremely, extremely valuable as well as, as «method programs, no much less reliable.

Perch angling Perch in the estuary is distributed, as a rule, in small “places “, and also it is possible to capture it with one or an additional success almost throughout the entire water location, but its greatest accumulations are still observed in locations with a deepness of 1 to 1.5 m. as well as not surprising that. Based upon personal monitorings in the spring — very early summertime on the tidewater, I can say that the peak taskof the perch attacking falls on the initial 30 minutes after daybreak, for a time interval from regarding 9.00 to 10.00, from 13.00 to 14.00(just lunchtime)and about 40 mins prior to sundown. I repeat, this is my individual observation, as well as it, normally, is not a law.

I adhere to the list below techniques of searching and catching perch: I find an area of the estuary with a depth of 0.5 m as well as above, after that with properly picked lure I make a number of fan casts, about 2-3 casts at one point with a pitch in between the factors concerning 15 degrees. If a bite follows at one of the points, after that I begin intensively firing a promising area, and if the bite continues, I attempt to figure out the « borders » and also instructions of motion of the bevy.

Having actually obtained the necessary details regarding the « border » of the group, I constantly attempt to fish it around the edges, since The « southerly » perch has an extremely active resistance when shooting and also produces excessive noise. Although I myself like Ultra light spinnings with dough up to 5 g, however the fishermen, not lured by ultra light gear, still should not overlook «the power reserve, since besides the tough turf, full-fledged pikes are typically tried on the «perch attraction. Excessively powerful « perch » rotating to anything, he «will not add self-confidence to you, and he will divide the pleasure from capturing right into two! As a result, for catching perch, I suggest spinning class Light with a test of up to 14 g.

If the line is already used woven, then with a damaging tons of as much as 2.5 kg, there is no demand for a lot more. I make use of just a monofilament line with a fluorocarbon finish, with a size of 0.15 mm. Once again, inexperienced anglers do not suggest utilizing slim angling line — for the exact same reasons that I do not suggest spinning of the appropriate course. The leash, in principle, is required, because biting pike for light take on is much from uncommon , yet, nevertheless, I do not use it — despite having a fishing line, as well as with a cord — a lot more so.

With a specific skill of vyvazhivanija pike, the risk of « cutting off » continues only presently of biting in instance of a miss out on, and also without it, the ability — the lack of a leash can rapidly trigger a sharp « deficit » in baits. You decide. Lures for catching perch in the tidewater do not differ in their details features, they are limited — just by the deepness of application. A revolving rewriter can rightly be taken into consideration a global bait for perch, as well as the estuary is no exception. I» will not describe the fantastic selection of « turntables » with which one — way or one more to capture perch, as well as I don’t need it. I will «only keep in mind that the baits with Long kind flowers Nos. 1-2 according to the Meps category were suggested in the most effective means.

From my arsenal, Mira from Myran(Sweden — photo 13 ), Long from Dragon-HRT (Poland — image 14) and artisan “sukhovsky”entices with a white frosted petal( picture 15 )executed well. A wobbler approximately 5 cm in «size(picture 16)with an energetic « video game » as well as unequal electrical wiring is one more point that you like perch! Very well for the perch « exercise » and also the numerous alternatives of jig snap-ins with microtwisther or linked to the jig-heads « fly » of the suitable dimension. Redfin fishing The capturing of the redder by rotating light or — ultra-light class has long discontinued to be something unusual, a minimum of for Krasnodar individuals for sure.

This is a very fascinating and also amazing angling! Ruddling, also «as perch, can be captured nearly throughout the tidewater, however the most intriguing are the meadow and also coastal reed line. The rudd is kept in the grass thickets or amongst the reeds, and a whole group may reveal interest in the”passing”lure, from 3 to15 people, as well as at the exact same time. Spinning for catching rudd needs to fit into the requirement of the ultra light class, this is due to the use of very light baits and slim angling lines, i.e. The examination series of the rotating need to not exceed 8 g, preferably the top limit is 5 g. The line is remarkably soft, monofilament and with a size of not more than 0.15-0.17mm.

The arsenal of lures for capturing rudd is typically lowered to a various version of craftsmens or self-made rewriters or” manufacturing facility”measure to number 1, micro jig or tools with artificial “front sights “. The dimension of rotating spinners somehow categorize fairly troublesome, but if we attract parallels with the classification of the company Mepps, after that these spinners have a dimension from number 00 to number 0000 (pictures 17, 18 ). And also, normally, using lures of this type includes using one of the most light and sensitive equipment.

When it comes to the manufacturing facility « turntables», it deserves noting as one of the most working lures with Aglia type petals to No. 0, with Long kind petals to No. 1(photo 19 ). The only issue is that firms making stably operating attractions in the « zero » structure dimension are essentially a few, and Mepps are not amongst them. Certainly, it is rather feasible to capture redfin as well as spinners of a bigger dimension, but this is still an exception to the regulations, rather than a policy for exemptions.

Microjig is a white whirlwind and also a miniature gram jig-head(photo 20 ), or a hook with a pellet sandwiched on the shank, or simply a tungsten jig. Irregular wiring with a brief pause or wiring with small jerks — all this can bring the « walking » rudd to interruption, requiring to excitedly strike the whirlwind. Tacking with the use of an artificial fly is very easy. A small weight of about 3-5 g is linked to the angling line.

Above the small weight we attach a leash from 10 to 30 centimeters in size to the angling line, to which we link a “fly”. The electrical wiring is similar to the micro-wiring, but a pause can be made longer, providing the «front sight » the possibility to rise in the water column.

Leave a Reply

Your email address will not be published. Required fields are marked *