Homemade fishing tackle for catching Chub

For the manufacture of spinners you can use sheet Nickel silver or sheet brass; you can use steel, be sure to covering the edges of the spinner tin on the steel spoon is very difficult to charge double.

The spoon, made of brass or other materials (except instruments), be sure to silver.

How to make a fishing tackle for catching Chub at home

For this purpose the spent fixer, where the spoon is dipped for 10-20 minutes. Silver-coated spoon is washed thoroughly with water and wipe tooth powder. After that, the spinner becomes black and double charge the hook with such force that it slid off the spinners not from accidental contact with a snag, namely at the time the grip of the ASP.

And yet, the thinner the wire from which the spring-latch and double it, the more natural the game of spinners.

Bait, commonly known spinner with a rotating petal, but instead of sinkers put a float of solid foam, and the tee through the spring is rigidly fixed on the axis of the spinner.

The float can be made of solid foam; its length should be from 0.6 to 1.2 the length of the petal, the float diameter from a quarter to a third of its length, the minimum diameter of the float in the middle section of 0.25 of the length of the petal. The spinner is equipped with a tee number is 8.5 (on domestic classification).

When posting this spinner in the bottom layers likely hooking sharply reduced. It is convenient to use when vertical jigging in Windows it has no freewheel, sinking it quickly and straight down.

Depending on the speed of retrieve of a spinner in the upper layers of its unpredictable and very real silver color.

The spring-latch is made of spring wire; its shape is determined experimentally. The double form is also necessary to define in practice.

The axis of the spinner is made of spring wire 0,8 mm, petals from sheet brass or Nickel silver with a thickness of 0.7 mm; the length of the petals 45 mm, width 20 mm. the Float can be made of solid foam;

Hunters Chub not so much busy activity, but I would like to thanks to my successful experience fans of this dynamic fishing became more.

One Comment on “Homemade fishing tackle for catching Chub”

  1. We are a group of volunteers and starting a new scheme in our community. Your web site offered us with valuable information to work on. You’ve done an impressive job and our entire community will be thankful to you.

Leave a Reply

Your email address will not be published. Required fields are marked *