2013 factory Molot in Vyatskie Polyany is remodeling fight automated rifle AVT-40 (comparable to SVT-40 that has the capability to shoot ruptureds) in civilian tools, which obtained the name carbine SVT-O. Rifle originates from the storage space of mobilization reserves.
In the course of changes on the barrel as well as receiver are ballistic marks, and also the design of the trigger and guard is modified to avoid automated fire.
The rest of the rifle remains genuine rifle SVT-40 with manufacturing facility stamps of the 40-ies of the last century.
Summary of the carbine SVT-7,62 x54r
Store semi-automatic (semi-automatic) rifle, working with the concept of the gas piston. 7.62 mm uses the classic rifle cartridge 7,62 x54r from the trilinear rifle with the edge at the bottom of the sleeve.
- The rifle is outfitted with a 10 shop, when shooting the last bullet, the shutter hops on the sealing delay. The receiver is open, that enables owner to bill patrons top.
- Wooden bed, solid wood (birch, beech, ash), it can be credited to polupustyne, yet the manage is so mild that there will certainly not be a big error to call it straight English.
- The trigger mechanism is unregulated, the circuit box is under the trigger guard, behind the trigger.
- Exterior sights– classic column in the slider with a line as well as shut the fly on a high bracket.
Advantages as well as negative aspects
Authentic rifle SVT-40, the fabulous weapons grade, took part in the Second world battle. Opinions concerning its unreliability as incredibly exaggerated. If a competitor was technically qualified, kept the tools tidy, specific problems had actually not occurred. Infantry of the German Wehrmacht thought fortunate to obtain such a trophy.
At the exact same time, it deserves noting that the rifle is truly technically made complex, its system is composed of lots of tiny parts, it needs attention and also cautious maintenance. Complicating matters is the open receiver as well as the gas chamber with vents.
- The gas piston has 3 adjustment openings, this permits you to tune the tools to utilize cartridges with bullets of various weights.
- Effective series of 1.5 kilometers, the quiting power of the bullet is very large, is an excellent weapon for hunting huge ungulates.
- There are problems with the installment of optical sights. Authentic «« tokarevskaya » brace has a ring, not appropriate to contemporary optics. For setup laths weaver or Picatinny will need the solutions of a certified Miller.
- To adhere to the demands of the legislation on civil tools, at the start of the barrel and also in the receiver establishes the supposed ballistic tags, leaving specific marks on the sleeve as well as the bullet, which facilitates the identification of weapons. They degrade ballistic performance. So a sniper rifle from SVT-On just will not work.
- Size rifles of 1230 mm, which is too much for a searching tool. While in running order it weighs 3.9 kg, which is a pound less than the carbine «« boar VPO-124 », a size of 1090 mm., a proportion of dimension and weight suggests that the margin of safety and security from SVT-On a minimal.
Fatal flaw– obsolescence style.
SVT-K. 7,62 x54r L-625 with brace for optics
Purpose This threaded civil weapon with ballistic markings for easy recognition. Utilized for hunting huge ungulates for sporting activity competitors. Selections There is design KO-SVT, which on the receiver propylene grooves for setup of the bracket under the optical view. In various other areas it corresponds the SVT-O.
Next off, the attributes of the carbine SVT-O.
Specs
| Attribute | The worth |
|---|---|
| Kind | Semi-automatic rifle |
| The principle of procedure | Gas piston |
| Size (mm) | The 7.62 |
| Cartridge | 7,62 x54r |
| Price of fire (rounds per minutes) | 20 |
| Muzzle velocity (m/s) | 829 |
| Intended fire range (kilometres) | 1,5 |
| Capacity | 10 rounds |
| Length without bayonet (mm) | 1230 |
| Curb weight of rifle without bayonet (kg) | 3,9 |
Design
- Semi-automatic rifle operating on the concept of the gas piston. Shutter longitudinal moving, hefty, loosened (without protrusions), includes a steel demonstrator with larvae and copper-plated shell with a handle in the shape of a ring on a short bracket.
- Flexible gas piston, powder gases, invested in it, being released through the cover with openings.
- The receiver is half-open (eviction), the spring return device is safeguarded by cover.
- The trigger system is uncontrolled, after shooting the last cartridge shutter becomes the bar of the delay. The fuse box is under the clip behind the trigger. In the blocking placement it is folded up down as well as mechanically does not move the hook back. To be translated to ««» Single » it is necessary to rely on the left and sink in the groove of the Lodge. Position «« Auto» » check box of the fuse to the right– blocked by the maker. In the style version it was feasible to keep the trigger pressed for longer than usual, releasing the hook sear totally, so the shutter might slide up to the complete exhaustion of the shop (shooting ruptureds).
- Store a 10, steel, lever to otmachivanija is in front of the trigger guard and has two placements: pushed in the fore-end (field) as well as vertical to it (functioning).
- Sights– rear sight with a line and a slider distance and a shut fly at a high brace.
- On the muzzle flash suppressor installed.
- Wood bed, polupoltina, with an extremely gentle grip, actually, it video English.
Packing as well as choosing
From the manufacturing facility the rifle is available in a canvas sheath, total distribution one store.
The concept of procedure
- For firing it is needed to equip the shop as well as to strongly wank. Or to offer a client (as a choice– clip) into the chamber from the top, when withdrawed, the stopper after that release deal with.
- The fuse box is turned to the left and also recessed in the groove of the Lodge. The rifle is ready to fire.
- After pushing the trigger, the hammer breaks in battle hook sear as well as struck the firing pin, and also he skewers the pill. Component of the powder gases pushes the bullet along the birthed, is released into the chamber, gas piston as well as pusher to return with the back gate. This motion is gone along with by a squad of USM. Urged by the spring, the screw returns and locks the barrel.
- Succeeding shots are fired by pressing the trigger. After firing the last cartridge, the shutter drops in the rearward setting. After pushing the trigger the shutter will go back to the forward placement. A pause can be used for packing.
Disassembly
- To discharge the weapon, for which to get rid of the store and also wank, placing it on hold.
- Eliminate the cleansing rod by pressing on the springtime packed button retaining bracket.
- Eliminate the clamp between the shaft and also the real estate of the gas piston by pressing the spring-actuated switch.
- Remove the top cover, gas piston, raising her rear end and also drawing back.
- To move on as well as remove the top wooden plate of the lower arm.
- To understand the mechanism of the gas piston, getting rid of the intermediate pin between it as well as the pusher paddle, and then eliminate the piston from the chamber and the extractor from the groove under the whole point.
- Click the trigger to return the gate to its forward placement. To relocate the cover of the receiver onward, as well as with her backside to press the steel probe (a screwdriver with a cross port) on the next switch. To remove the cover.
- To take apart the return mechanism, containing springtimes as well as guide (pin as well as tube) by pulling the derive from the back side of the receiver.
- To remove the shutter, relocate along the overview rails back and lifting. To divide the covering with the handle of a cyndrical tube lock.
- Take the grooved button on the back plate of the receiver to the left, click on the following switch with an iron pin. Then USM with an unique click will be launched from the ports down.
Tuning
Is the installment of optical sights. For this both sides of the receiver propisyvayutsya grooves, permitting you to set up a brace. As a variation– to make a series of holes as well as cut them with the thread, the brace is secured with bolts. For the manufacture of the brace will certainly require the solutions of a qualified Miller.
It’s time to find out rates and also testimonials on ed. hunting rifle SVT-7,62 x54r.
Costs
The rifle is from 20 to 25 thousand rubles. Currently let’s see what are testimonials regarding the carbine SVT-hunters and also proprietors.
Evaluations
Because of the ballistic label weapons in terms of accuracy away from the sniper. When shooting at a range of 100 meters, a discrepancy of about 7.5 cm is Not specifically convenient for the chassis and also driven hunts. Ideal made use of in ambush.
