Catching bream, in September

Beginning in September , the fish behaves somewhat differently, and the catching of not open reservoirs and in rivers varies slightly.

Today we will talk about feeder fishing for bream in September and find out how he likes to feast on himself at this time, when it is better to go fishing and which rivers will show themselves from the best side.

Fishing for bream is a special matter, but this does not mean that the difficulties of this type of fishing cannot be solved. On the contrary, our task is to uncover the wisdom of feeder fishing for the most beautiful and delicious commercial fish. After all, whatever one may say, but one also wants to catch bream in the fall, and the true fisherman will not miss this period.

The golden time is a motivation to pull ashore a real monster aspire over 1.5 kilograms. If you’re lucky, you’re lucky! The 3-5 kg ​​trophy is an enviable dream of any angler. But you cannot rely on one luck, the representative of the carp is a smart fish that can bypass the “enemy” in the face of the tenth fisherman and, having studied the bait, lead the whole flock along.

True, if armed with information and the lion’s share of patience, fishing can not only end successfully, but also begin with the catch of a large individual. This is seen in many examples from the video about how bream pulls on the Oka River, for example. The main thing is to find a good place, where there will be edges, and holes about 3 – 8 meters or a coquette. A bream loves muddy places and feeds, skillfully making its way to various hollows on the bottom. Looking for bream in wetlands with mud and small pits is a waste of time.

The beginning of a cold snap bream feels like no other. This is the period when the fish have spawned, there is nowhere to hurry. The fish chooses the places quieter (without strong waves), goes through the grubs and becomes capricious in the choice of food. Especially in the beginning of autumn, when a cold snap is expected, but still very warm. And in order to really get a flock of bream, day air temperature is not lower than 15 degrees.

The outputs of the bream during this period are different on all the rivers, but usually the bream comes out an hour after sunset, at night before dawn, and peals badly during the day. A whole flock follows him, and if you manage to feed the place in advance (2 hours before the exit), then an excellent bite of the whole flock is provided.

Of course, catching on a feeder implies special equipment, more precisely, a snap. And even if you plan to catch palechchiki, you should take care of the tackle in advance, having bought the correct fishing line, reel, hook and feeder.

First of all, you need a feeder rod length of at least 3-4 meters (for long casts and deep fishing places). Why exactly this size? The fact is that with a large rod it is easier to lift the feeder from the bottom, this eliminates the possibility of mud entangling on the hook. You should choose the average type of fishing rod, as it is precisely intended for catching bream in the reservoir or on the river in the absence of a strong current.

Casting such rods near the bushes, trees and reeds is not very convenient. But, as they say, the fish is looking for a place where it is better, and does not ask permission from the fishermen. But if you manage to choose a cleared place with a deep precipice, then you can fish with special pleasure, without the risk of injuring yourself and nearby fishermen.
So, slightly deviating from the theme of gear, we will continue.

Required accessories for the feeder:

  • Coil . Spin-free with a well-adjusted clutch (size 3000-5000). The byte-runner system is necessary with sharp poklevkah to protect themselves from the trouble of tangling the fishing line.
  • Lesko . For short casts up to 50 meters, monofilament is better, it is more durable and thin at the same time, with a diameter of about 0.25. For long casts, a braid with a diameter of 0.1-0.16 is suitable. Be sure to use a leash, it will increase the number of catch. Bream fish shy.
  • Hook . For catching bream, choose a small size of hooks: approximately from No. 7 to No. 9 for a nozzle of worms and No. 4 – No. 6 for a nozzle of barley, corn. The hook must be of high quality and very sharp.
  • Feeding trough . Its weight should not be more than 100 grams, especially if you are fishing with a light or medium type feeder rod on the river. When fishing on the lake use feeders with low weight.

Feeder should be selected depending on the weight of the feeder rod. It indicates the weight and the possible type of cargo. For example, when using a Medium rod, the weight with the feeder should not exceed a weight of 80 grams. Otherwise, the probability of breakage of the rod is great, but less weight, respectively, will have a bad effect on the sensitivity of the bite beacon.

Bream biting occurs with a smooth supply upward and withdrawing it to the right or left. Bream thus trying to escape. This is the main pronounced characteristic of bream biting. It is necessary to cut with a firm hand, sharply and carefully. The bream’s tender lip may burst at that moment. Then you need to smoothly fish the fish to the shore, using tactics with jerks, stopping each time, but not greatly weakening the fishing line. The main thing when catching a bream is to use the garden, it’s impossible to pull it ashore, otherwise there is a great risk of breakdown.

Feeder lovers – go ahead for night fishing

Bream love the warm weather. Therefore, when they feel a decrease in temperature, they try not to swim to the shores at all. And if windy and overcast weather is planned, the bream can stop pecking at all. This fact must be taken into account in accordance with the weather for tomorrow. Night fishing is the best that an angler can expect when he “hunts” bream or white bream. The most active biting is observed just the same in the evening, before sunset and at sunrise.

Lakes and reservoirs – a great place for catching bream at night. In still water, as a rule, bream is calmer, and you can catch a trophy specimen. It would be nice to arrive at rates at 2 hours before the planned rest, or rather, sports feeder fishing to explore the place. The marker weight lowered to the bottom will help to orient oneself in depth; such a bottom survey is well reflected in further fishing. You can use a coastal depth sounder to check the depth.

Features of catching bream in river expanses

Arriving at the river, you need to determine the place of fishing, checking the depth. Well, if there is a place with a steep bank and not very deep brow. Only then should mix the mixture – bait and arrange gear. Purchased mixture must still brew.

An excellent catch of bream can be obtained by going fishing in the expanses of the Volga or the Dnieper. For the best catch fishermen strive to go there.

Bream feeding feeder – casting technique

Do not rely on the case and sit near the rod for hours in the hope of biting. This is not float fishing, and sports feeder. Therefore, every half an hour experienced anglers advise to change the nozzle and repeat the cast. And you can feed the point once a minute. For beginners better practice in the cast. It is practically impossible for anyone to show the correct casting in the photo without sharp jerks. But the video will help the novice amateur feeder correctly throw tackle.

It must be remembered that the bream does not like to bite in different places, so the cast must be repeated in the same place. Having determined the accuracy of the load, it is necessary to zaklipsovat fishing line, and then repeat the casts precisely in the area of ​​the edge or of the cliff where the fisherman plans to get a bite.

Technique prikormki

Experienced fishermen say: the fish must be respected, especially the baiter a few days, and then cool fishing is provided. It may also work so that the fisherman lures several places at a distance of about 50 meters, trying to install rods about an hour later. Usually bites happen right away.

If this happens, you can feed the fish again, the main thing is to avoid overfeeding. After a good dinner, no bream will want even a moldy worm on a hook, however appetizing it may seem.

The consistency of the bait should be small fraction, so that the bream is not fully saturated. In September, it differs from the cooler and spawning period in that this fish likes to feast on protein food more than on vegetable and flavored food. Therefore, the number of attractants is minimized.

The most important rule of primorye bream – add to the bait the same protein ingredient that will be impaled on the hook. But not all anglers adhere to this rule, considering that if you add moths to the bait, then you are provided with restless fishing with a bunch of small fish, which, in fact, will only scare away large bream. Well, in this case you need skill and experiments. It is very good to add corn to the food, in summer and autumn the bream still actively reacts to bright colors, and he likes the taste.

Types of bait

Both for standing and running water, commercially available mixtures can be used. If you do not want to bother with the preparation of food for the bream, you should take a closer look at the “Best” brand and purchase a piece of bait for the feeder, mixing it with the bait for the bream. In parts of components 1 to 1, add water already in place (on the river or reservoir). Such companies as Sensas, Super Champion Feeder, MethodMix, Unicorm, Fish dream, Traper perfectly show themselves when they catch a large bream.

To impart color and weighting, you can use those dyes and components that are present at the bottom. If it is a shell rock, add ground shells to the mixture, if the clay bottom is clay, earth. It should be remembered the rule: the more current on the river, the heavier the feeder should be. Most often, bream reacts to light colors and delicate aromas. In September, offer bream sweet aroma of vanilla, cinnamon or garlic, anise, mint.

Usually angler, the meaning of life is fishing, uses homemade porridge. As for components for porridge, the most favorite bream are: peas, corn, fried ground sunflower seeds, millet, wheat, barley.

Maggots, dung-worm are also good for bait and subsequent bait. But here it is better to protect yourself by scalding the worm and moldy worm with boiling water. So you can immobilize it, but the bait will not lose its flavor and taste. Protein food weights and does not allow the mixture to be sprayed into a small mixture, attracting fines. A protein in the fall of the fish needed to stock up on fat in anticipation of the cold. Motylya in the early autumn is better not to add.

“You won’t spoil the porridge with butter”

Bream likes sweet, but is it worth adding sweet syrups to the bait? The fact is that it is better to add sweetness already in place, so that the prepared mixture does not sour down the road and scare away large fish. For viscosity, you can add semolina or oatmeal groats to porridge. Lambs is convinced that the best porridge consists of millet, peas not boiled down and roasted ground seeds. This bait acts on the fish unconditionally.

For the flow:

  • 50 g finely chopped bacon (unsalted)
  • 100 g breadcrumbs
  • 100 g of breading or rye bran
  • Boiled rice – 100 g
  • Ground Coriander – Pinch
  • Maggot
  • Clay or semolina.

For any feeder fishing:

  • Peas and millet in a glass (cook and mince)
  • 1.5 cups twisted dried bread
  • 2.3 cups of semolina
  • 2,3 glasses of makukha
  • For half a cup of flour and cake
  • Hercules – 0.5 cups (pre-steamed for 2 minutes).

All the ingredients of this recipe are added in sequence from the first item to the last. Aromas and flavor qualities of the mixture should be addressed already on the shore. Need to mix 4 tbsp. spoons of sugar, a teaspoon of cinnamon, salt, 1/3 cups of fish food and a pinch of coriander, not forgetting to add moldy mold. Live bait is required for September – October, so if you do not add maggots or manure worms, you should add to the mixture of dry blood, it will definitely send a flock of bream to your place, and maybe not one.

Leave a Reply

Your email address will not be published. Required fields are marked *