Float tackle for fishing is considered the most common, it was used for food production in prehistoric times. A lot of different ways of catching have been invented by a predator these days, but it is a float fishing rod that allows you to catch trophy specimens even when the bite is really bad.
There are several ways to capture a predator; each angler prefers the one he likes best. Catching pike on live bait for a bobber is now once again gaining popularity. Simple tackle, available components, the possibility of fishing both from the coastline and from a watercraft will make it possible to obtain trophy specimens of a toothy resident of a reservoir.
A pike responds to live bait in any weather, no other lures can interest the predator better. Do not forget about high-quality equipment, only a balanced tackle will allow you to catch a trophy.
The fishing process itself is not complicated, all steps are standard:
- the form is equipped;
- bait is being mined;
- live bait is hooked;
- casting to a pre-selected promising place.
Soon, the pike will definitely notice the delicious food offered to her and conduct an attack. Then it’s small, realize the notch and catch the catch.
Gathering gear
Catching pike on live bait for a bobber will be successful only with high-quality gear, for this you must first know all the components and their characteristics.
Pike gear consists of:
- fishing rod blank;
- high-quality inertialess reel ;
- monofilament fishing line for the basics;
- float;
- sinkers;
- leashes;
- hooks;
- auxiliary fittings.
Putting it all together, you get tackle for catching a predator.
Fishing rod
Pike on live bait fish on a fishing rod are caught in different parts of the pond, tackle is made for her moving, so the length of the form is not very important. However, it is necessary to choose from options of a telescopic type and with rings. Bologna rods are ideal , fly-fishing for this type of fishing is not taken.
An ideal option is a 4-meter-long form, with which it will be possible to carry out fishing in medium and small bodies of water both from the coastline and from the boat . If the pike is planned to be caught on a float in large bodies of water, then six-meter forms are taken from the shore for capture, but 4-5 m are enough from the boat.
Small ponds are also caught with a three-meter fishing rod, it is especially convenient to work with such a form from a craft in water areas of any size.
Particular attention should be paid to the whip, it should not be soft. For a serif at the right time, a rigid or semi-rigid option is ideal.
Coil
To collect gear for this type of pike, you need a high-quality inertia-free coil. Strength indicators will be important, because when fishing, the pike is very resistant. The choice should be stopped on products with the following characteristics:
| characteristic | indicators |
| number of bearings | not less than 4 pieces |
| gear ratio | 5,2:1 |
| the size of the spool | 2000-3000 |
It is better to choose from options with a metal spool, it will be stronger and better when coping with the entrusted duties.
Basis
On a pike on live bait, as a basis, it is best to use a monophilic fishing line with a slight stretching effect. Gentle tackle is not necessary, the thickness should be sufficient to withstand jerky toothy.
Experienced anglers recommend setting at least 0.28 mm in diameter, but 0.4 mm will not be thick . It all depends on the size of the pike in the pond chosen for fishing.
It is better not to put the cord on the base, its strength indicators are better, but the float with a sinker will slide worse on it.
Float
Pike on the float to be caught with some features, they consist in collecting gear, namely shipment of the float.
It’s worth starting with the choice of a bite indicator; rather tough options are suitable for tackle. For such purposes, floats from 6 g or more are chosen, the option under 12 g is considered to be an ideal option. This is enough for long casting, and will fit almost any live bait.
The best option is wooden balsa models , and homemade ones are often used. An excellent option would be to do it yourself from a wine cork and a plastic stick instead of an antenna. Foam are also used, they can be made of any shape and under any load.
The bait float is selected only from sliding ones; models for blind equipment will not work.
Hooks
For mounting live bait they use either tees or doubles, single hooks for collecting such gear are not taken.
The tee is used for larger options, they hook the live bait behind its back so as not to touch the ridge, but also to bring the fore-end under the fin.
Double ones are used to equip more delicate and small fish. A good installation option is to snap through the gill covers.
Other components
The leash is recognized as another important component for tackle with live bait, without it fishing a pike on bait fish on a float will not work.
For snap use:
- forest, they will be good options, but they can cut their pike with their sharp teeth;
- fluorocarbon options are now very popular, they are not visible in the water and perfectly hold the blow of a toothy resident;
- steel is the most reliable, it will be difficult to eat her pike;
- the lead material is used most often, it is soft and strong enough, but the pike is often over the teeth;
- Kevlar leashes are often used, but their predator can also have a bite;
- titanium appeared on sale recently, but has already managed to gain the confidence of anglers, their minus is the price.
Clasps, swivels and lock beads are selected according to the strength, they must be of good quality and withstand decent loads.
The choice of live bait
Pike on live bait fish will only react to a fishing rod with an active bait, which is why special attention is paid to the choice of fish.
To catch pike use:
- crucian carp;
- roach;
- bleak;
- perch;
- dace;
- chub;
- rudd;
- rotana;
- the fry of the predator itself.
The more you want to catch a pike, the larger the fish is hooked.
Where to get?
Without live bait fish, pike fishing in spring will not work on a fishing rod, and at other times of the year too. But where to get fishing bait? Experienced fishers recommend catching bait fish for float tackle in the same pond, where pike will then be caught. So you can be sure that these types of fish are included in the diet of the predator.
How to plant
There are several methods of planting live bait, but two main ones are used for float fishing:
- tee on the back, it is necessary to hook so as not to damage the ridge, but also to start under the fin. Otherwise, live bait will break at the first cast.
- Doubles through gill covers injure live bait less, remains active longer in water. To do this, a leash without a hook is led through the gill cover into the mouth of the fish. Nearby they hold a hook that is attached to the leash through the winding ring.
Some in order to save bait longer do not pierce anything at all. A clerical gum is put on the tail, and a tee with one forearm is placed under it.
The subtleties of catching pike on a fishing rod with bait fish
The pike bite well, often the catch exceeds the achievements of spinners with a bunch of artificial baits. Using this method, the main thing is to choose a promising place and catch each section of the reservoir for no more than 20 minutes.
A pike will respond to a bait bait in its permanent parking places, namely:
- on the border of clean water and vegetation:
- along coastal vegetation;
- when leaving the bottom pits;
- at the brow;
- on the plaster and bays;
- near snags and flooded trees.
Immediately after casting, you must wait about three minutes, so that the bait fish will get used to a new place, and then carefully monitor the movement of the float. It is not worthwhile to pinpoint after the first blows, the pike only drags the potential victim to cover, but when the float goes under water they make a cut. Then gradually catch the catch, while strong jerks should not be done.
A fishing rod for catching pike on live bait is collected, most of the secrets of capture are also revealed. It remains to collect tackle and try it in practice.
